Cool Garbage Can Storage Shed
Simple And Easy Steps To Build a Garbage Storage Shed
Garbage can storage sheds are beautiful features to every home. Garbage sheds could be costly, and they cannot be large enough to accommodate all the garbage cans in your home. Here are some steps how to build an outdoor shed intended for garbage cans as well as recycle bins:
Measure the site where you are planning to set up your garbage can storage shed. Measure the width, length and height. Because you are constructing this garbage can shed, make sure you stack all garbage cans subsequently one after the other. The garbage shed may be long as you wanted.
Prepare the location for the garbage can shed by means of leveling the land, taking away the rocks, the weeds and many others. The space must be level to avoid the outdoor shed from tilting over. You may put the shed straight to the soil or place it on 4 corner bricks or rocks.
Look for free pallets or platform in your area. Several businesses place them out curbside, whenever they do not want them anymore. You have to find six to eight platforms depending on the dimension of the location you measured. Try to look for fine, solid pallets. You would need an additional one or even two pallets intended for spare wood.
Put two to three platforms down to the land next to each other. Using two to four inch screws connect the pallets to each other. Attach six to eight screws to protect the pallets to each other. When complete, toss the pallets above having the face upward. This will act as the foundation of the garbage can storage holder.
Connect one pallet to the wall of the platform; this will become one side partition. With the use of two to four inch screws, connect the side pallet into platforms at the bottom. Attach the pallet into the other part of the pallet. This will act as the other wall at the side. With the use of two to four inch screws, connect the side pallet into the pallets at the base. This will comprise the sides of the outdoor shed.
Connect a pallet into the rear of the bottom pallets. This will create the wall at the back of the shed. You would need to connect another pallet to become the second wall at the back depending on how long you create the base. Use the two to four inch screws to connect the platform to each other.
Using an extra platform, split separately all the wood and make use of the individual pieces of wood. Build the side wall arm by attaching a wood from the bottom to the rear pallet, and then the arm is connected at an angle. Build the side wall supporting arm to the other area at one angle. Construct a back wall supporting arm by connecting a piece of wood on top of the rear wall. This will strengthen the wall pallets Connect one piece of wood at the bottom of the rear wall pallets. This will strengthen the base. Connect the third wood at an angle in the rear wall.
Use outdoor paint to cover the three sided outdoor shed. Place two coatings of paint for your garbage can storage shed.